IP67 Outdoor Waterproof LED Drivers — 7W to 2000W
Fully-potted IP67 outdoor LED drivers from 7 W to 2000 W in aluminium housings. CV + CC dual control, 3–5 year warranties, SiC efficiency platforms.
IP67 outdoor LED drivers are fully-potted power supplies sealed against rain, dust and humidity for exterior architectural, landscape and signage lighting. Towe builds five waterproof families covering 7 W to 2000 W, all in aluminium housings with full silicone potting, warranties of 3 to 5 years, and wide 110–265 V AC input for unstable grids.
Scope: what this product page covers
This page covers outdoor and damp-location drivers: building facades, bridges, landscape and garden lighting, outdoor advertising, street furniture and wet interior spaces. For interior light boxes and channels, the ultra-thin or standard constant voltage series is more economical.
Specifications
| Power range | 7 W – 2000 W (5 families) |
|---|---|
| Ingress rating | IP67 (TH, TD, TY); IP65 (FY finned) |
| Input voltage | 110–265 V AC wide input on all models |
| Control | Constant voltage; TD adds constant current dual control |
| Warranty | 3 years (TH, TD, FY) / 5 years (TY) |
| Topology | SiC-based high-efficiency design (TY series) |
| Housing | Full aluminium with integrated cable glands |
| Operation | Humid, dusty and outdoor environments year-round |
Materials
- All-aluminium extruded or die-cast housings with full silicone potting
- Silicon-carbide switch platforms on the TY series for low temperature rise
- UV-resistant output leads molded for exterior exposure
- Mounting flanges and tabs on all wattage classes
Manufacturing process
- Full potting Primary and secondary sides are encapsulated so no air pocket remains — this is what makes IP67 survive years of rain and thermal cycling.
- ICT + Hipot Boards pass computerized ICT, then every assembled unit passes a high-pot insulation test before potting verification.
- 100% full-load aging Every unit runs full-load high-temperature aging; waterproof units are aged in their sealed housings, not on open benches.
- Wide-input verification Each batch is spot-checked across the full 110–265 V AC window, because Gulf and Central Asian grids swing hard between night and day.
IP67 Outdoor Waterproof LED Drivers in production
Typical applications
- Facade and architectural floodlighting on buildings and bridges
- Landscape and garden lighting in humid climates
- Outdoor advertising light boxes and channel letters
- Street, park and square lighting retrofits
- Wet interiors: cold storage, greenhouses, wash-down areas
Quality and documentation
- Every waterproof unit is potted, hipot-tested and aged fully sealed.
- Field failure rate held at 0.03% or lower.
- Real-world failures trace to potting voids and connector ingress — both verified out in production.
What we do not do
We do not build submersible (IP68) or in-ground underwater drivers, explosion-proof units, or drivers with integral emergency battery packs. Constant-current-only projects are served by the TD series dual-control range; pure DALI/0-10 V dimming is quoted case by case.
Technical questions
What is the largest waterproof driver you offer?
The TD series tops out at 2000 W with constant voltage and constant current dual control in an all-aluminium housing. The TY SiC series reaches 1500 W with a 5-year warranty and lower temperature rise.
Will the driver survive a Gulf summer?
The TY series was designed for exactly that: SiC switching keeps internal temperature rise low, and the series is specified for Middle East facade projects — it carries a 5-year warranty.
IP67 versus IP65 — which do I need?
IP67 survives temporary immersion and driven rain, and is the right choice for exposed facades, ground-level floodlights and coastal sites. IP65 handles rain and dust for mounted applications like the FY finned series under canopies.
Can I get a waterproof driver with my own label?
Yes. OEM waterproof drivers ship with your label, gift box and laser-marked housing under the same IP67 process. Minimum volumes apply per wattage; send the project specification to sales for a quote.
Adjacent products and capabilities
Constant Voltage LED Drivers
Constant voltage LED drivers convert 110–265 V AC mains into a regulated 12 V or 24 V DC output for LED strips, linear lights and light boxes. Towe builds constant voltage drivers from 60 W to 600 W across six series, with over 5 million units field-proven, a production pass rate above 99% and warranties from 2 to 5 years depending on series..
View product48V Magnetic Track Drivers
Magnetic track lighting runs on 48 V DC and needs a power supply matched to the track adaptor profile. Towe builds dedicated 48 V magnetic track drivers from 100 W to 300 W in slim housings with IP65 protection, stable flicker-free full-load output, and an optional smart version with full-scene platform compatibility and a 3-year warranty..
View productQuality & Testing
100% full-load aging on 10 racks, ICT before assembly and hipot on every waterproof unit. 99%+ pass rate, 0.03% field failure.
Quality systemTell us the wattage, get a quote in 24 hours
Send the series or specification and your target quantity. You will receive a quotation with lead time, warranty terms and the quality summary for the series — no obligation, and no sales call unless you ask for one.