LED Drivers for Architectural and Facade Lighting in the Middle East

Fully-potted IP67 LED drivers from 7 W to 2000 W for building facades, bridges and landscape projects, with wide-input protection for unstable Gulf grids.

IP67 outdoor LED drivers in fully-potted aluminium housings used for facade and landscape lighting projects
TD and TY series: 24 W–2000 W for exterior architectural installations.
Short answer

Facade lighting stresses LED drivers with heat, driven rain and unstable mains. Towe supplies fully-potted IP67 drivers from 7 W to 2000 W for architectural and landscape projects, with 110–265 V AC wide input for Gulf grid swings, SiC-based low temperature rise on the TY series and 3 to 5 year warranties.

Scope of supply in this sector

We supply the drivers and power supplies for facade, bridge, landscape and square lighting. We do not manufacture luminaires, floodlight housings or control systems — contractors integrate our drivers into their fixture or custom housing programmes.

Requirements

Ingress protectionIP67 minimum for exposed positions
Input window110–265 V AC wide input
AmbientHigh-temperature Gulf summers, full rated power
Warranty3–5 years, backed by 100% aging
Power classes24 W–2000 W per point
DocumentationCE, RoHS; test reports on request

Materials we machine for this sector

  • Silicon-carbide switch platforms (TY series) for low temperature rise
  • All-aluminium housings with full silicone potting
  • UV-resistant molded output leads
  • Thermally conductive, void-free encapsulant

Applicable standards

  • CE and RoHS certification on export families
  • IP67 / IP65 verified by sealed-housing aging and hipot testing
  • Short-circuit, overload, overvoltage and over-temperature protection on all units

Typical parts

  • Floodlight and facade wash drivers, 24–2000 W
  • Landscape and garden lighting power supplies
  • Landscape light strip drivers for building outlines
  • Constant current dual-control units for mixed fixture fleets (TD series)

Quality risks specific to this sector

These are the failure modes we see most often in this industry. They are listed because knowing them before design review is cheaper than discovering them at first article.

  • Undersized input windows fail during night-time grid surges — we specify wide-input only
  • Potting voids become water paths; every unit is hipot-tested and aged sealed
  • Cheap "same wattage" drivers derate silently in 50 °C ambients — the TY SiC series is rated for Gulf summers at full load
Architectural & Facade Lighting

Compliance and capability questions

Which series should a Dubai facade project specify?

The TY SiC series for floodlights up to 1500 W — low temperature rise and a 5-year warranty — with the TD series filling 24–2000 W points that need constant voltage plus constant current dual control.

Can drivers ship with project-specific labelling?

Yes. OEM marking, gift boxes and housing finishes run through the same IP67 process. Send the project schedule and label artwork to sales for a written quote.

How do you support a tender with technical documents?

We provide CE and RoHS certificates, series datasheets and the quality summary (pass rate, failure rate) with quotations. Additional test reports are arranged through sales per project.

What breaks facade drivers in the field?

In order of frequency: water ingress through potting voids or connectors, grid surge outside a narrow input window, and heat ageing of undersized capacitors. Each of these is addressed by sealed potting, 110–265 V wide input and full-load aging respectively.

Tell us the wattage, get a quote in 24 hours

Send the series or specification and your target quantity. You will receive a quotation with lead time, warranty terms and the quality summary for the series — no obligation, and no sales call unless you ask for one.